Configuration Netgear GS108T par CLI¶

Connexion¶

Se connecter par telnet ou nc sur le port 60000 de l’adreese IP du switch
Taper admin en réponse au message de prompt
Indiquer le mot de passe du switch
Entrer la commande enable
Puis enter pour indiquer un mot de passe vide

telnet IP 60000

Trying IP...
Connected to HOST
Escape character is '^]'.

(Broadcom FASTPATH Switching)
Applying Interface configuration, please wait ...admin
Password:********
(Broadcom FASTPATH Switching) >enable
Password: (vide)

(Broadcom FASTPATH Switching) #show interface 0/2


Packets Received Without Error................. 20021
Packets Received With Error.................... 0
Broadcast Packets Received..................... 1260
Packets Transmitted Without Errors............. 16908
Transmit Packet Errors......................... 0
Collision Frames............................... 0
Time Since Counters Last Cleared............... 0 day 0 hr 22 min 42 sec�c��ȁ��

(Broadcom FASTPATH Switching) #show interface 3/1


Packets Received Without Error................. 116213
Packets Received With Error.................... 0
Broadcast Packets Received..................... 82
Packets Transmitted Without Errors............. 44507
Transmit Packet Errors......................... 0
Collision Frames............................... 0
Time Since Counters Last Cleared............... 0 day 0 hr 23 min 2 sec�c��ȁ��

Interfaces¶

Sur le GS108T, les interfaces vont de 0/1 à 0/8 pour les 8 ports et de 3/1 à 3/4 pour les 4 aggrégations possibles.

Config VLAN¶

créer le VLAN

(Vlan)#vlan database
(Vlan)#vlan 200
(Vlan)#vlan name 200 "TEST"
(Vlan)#exit

configuration interface

#config
(Config)#interface 0/1
(Interface 0/1)#description 'interface 1'
(Interface 0/1)#vlan pvid 200
(Interface 0/1)#vlan participation include 200
(Interface 0/1)#vlan tagging 200
(Interface 0/1)#vlan acceptframe vlanonly
(Interface 0/1)#vlan ingressfilter
(Interface 0/1)#exit
(Config)#

supprimer le VLAN

(Vlan)#vlan database
(Vlan)#no vlan 200
(Vlan)#exit